top of page

This is Autoterms newest control panel that controls Autoterm diesel heaters conveniently and easily.

 

Comfort controller features:

 

Intuitive user interface;

LED status display.

Thermostat function;

Additional heating options;

Quick access button for heating;

Vehicle battery safety function;

Heater maintenance reminder.

Precise integrated digital temperature sensor.

 

Click here for manual.

Comfort Controller

SKU: 4002
£120.00Price

Heating modes for air heaters

 

TEMPERATURE MODE:

 

Heater will maintain set temperature by reducing the heating power, without shutting off the combustion process.

 

POWER MODE:

 

Heater will operate constantly at set power level.

 

HEAT + VENTILATION:

 

Heater will operate till the temperature is reached 1°C above the set temperature, shut off the combustion process and start to ventilate till the temperature drops 5°C below the set temperature. When temperature drops, heating starts again.

 

THERMOSTAT MODE:

 

Heater will operate till the specified temperature is reached then shuts off the combustion process and ventilation. After the temperature drops by specified degrees heating will start again.

 

Heating modes for liquid heaters

 

PRE-HEATING MODE:

 

Heater will operate till the certain coolant temperature is reached then shuts off the combustion process. After the temperature of the coolant drops heating will start again.

 

ECO MODE:

 

(only for FLOW 14D)

Pre-heating mode with reduced power and fuel consumption. Temperature of the coolant is reached slower than in “Pre-heating mode.”

 

THERMOSTAT MODE:

 

(only for Flow 5)

 

Heater will operate till the specified interior temperature is reached then shuts off the combustion process. After the temperature drops by specified degrees heating will start again. Temperature is read by control panel.

 

*for setting up “Thermostat mode” see instructions for AIR heaters.

 

Temperature sensor

 

Custom calibrated digital sensor with +/- 1.5 degree offset.

 

Timers

 

Max - 3 timers.

Heating mode can be chosen for each timer.

 

All 3 timers can be active simultaneously.

Set timer is active continuously till disabled

 

Available cycles:

ED - Everyday

EW - Every workday

Custom days

 

Status display

 

Display

LED red - heating

LED blue - ventilation

LED green - shutting down

 

Display dimensions (mm)

37 x 20

Control panel dimensions (mm)

82 x 37 x 19

Related Products

bottom of page