A manual diverter valve allowing you to direct hot air current between 2 different directions. The diverter is controlled manually and can be set on a "mid" position to allow for hot air to travel down both branches.
 
This can also be controlled via a remote cable, which can be purchased here.
 
This diverter is used on our now discontinued Xchange kits and on our Hybrid kits until Aug 2023, before the introduction of the smart controller, which adds a servo to the top of this diverter for electronic control.
 
If you require a diverter with an automated servo on like in our current Hybrid kits we sell this here.
 
3 sizes available to fit either 60mm, 75mm or 90mm ducting. Supplied with 3 jubilee clips.