top of page

Plumbing in your Bobil Hybrid

Adding the Bobil Hybrid to your existing setup is strightforward, whether you use 12mm or 15mm plumbing.

To connect the Bobil Hybrid to your plumbing we provide 1/2" BSP female connectors, so you can just purchase the male version of these connectors to connect everything together.

You can also use the Bobil Hybrid to stop your cold water tank tank freezing in cold weather.

A controller monitors the tank temperature, and if the water tank is lower than the setpoint, a solenoid is opened pumping hot water into the cold tank. If this is something that interests you, please contact us for more information at or complete the contact form on the website.

2,590 views2 comments

Recent Posts

See All

2 comentários

Rob Noble
Rob Noble
03 de mai. de 2022

Could similar be achieved for the waste tank by looping a hot water pipe circuit through the tank? A continuous flexible pipe with no connectors in or on the tank would avoid any risk of waste water being drawn into the fresh water circuits. It'd be slower to heat up the tank that the fresh water design, admittedly.

Adam Mráz
Adam Mráz
12 de mai.
Respondendo a

You buy car antifreeze on head glass in your supermarket better mínus 60 deg celsius mixture and put it there

bottom of page